High speed reel with front friction-type brake and balanced, double handle. The reel body and rotor are made of Graphite. The reel is characterized by smooth motion, absence of vibration when winding at high speed and smooth friction adjustment.

The main spool is made of aluminium alloy, spare spool is made of graphite. The reel gears are made of high quality bronze. High quality low-profile multiplier left hand reel. To prevent line tangling while casting, the reel is equipped with brakes: mechanical brake and 6-position fine adjustment magnetic brake. The line guide is covered by titanium nitride coating and is static while casting the bait.

All reel bearings are made of stainless steel. Light spool is made of special aluminium alloy. Balanced double handle with rubber knobs. The reel is designed for medium-sized baits.

The titanium nitride coated line laying mechanism is static when casting the lure. The reel has the fishing line cross-laying installed, which keeps the fishing line from falling between previously reeled turns. The lightweight spool is made of special aluminium alloy. The well-balanced double handle has rubber grips. The reel is intended for fishing with a medium-size lure. A powerful, high-quality multiplier reel is intended for trolling, fishing by casting and weighing with big lures and on ground tackles.

For casting, the spool is switched off by switching the lever. The power mechanism is automatically switched on by by turning the reel handle. All enhanced reel bearings are made of stainless steel. The reel has a mechanism to uniformly lay the fishing line on the Graphite spool with the wire fishing line laying mechanism.

When casting, the line laying mechanism is not switched off, but follows the fishing line without decreasing casting distance. The spool reverse is restricted by a reliable ratchet. A model series with classical multipliers intended for fishing big fish by trolling, with big lures by casting and weighing and on ground tackles. As in all other traditionally designed spools, the spool is switched off before casting by pressing the key on the side of the body.

The power spinning mechanism is automatically switched on by turning the reel handle. The reel has a mechanism to uniformly lay the fishing line on the aluminium spool. The line laying mechanism is classical — wire. When casting, the line laying mechanism is not switched off and follows the fishing line; it does not decrease the casting distance. The body and the spool are made of durable graphite. Easy and convenient adjusting of brake.

The fishing rod blank is made of carbon fibre. Carbon fibre is very durable; because of this, fishing rod walls are made very thin and the fishing rod has a minimal weight and high sensitivity. The fishing rod blank is made of two components: carbon fibre and glass fibre. Information: the fishing rod weight and its strength form the composite parameters for the rod blank material; these blanks are between the blanks made of one of these components.

The fishing rod blank is made entirely of glass fibre. Glass fibre is less a durable material than carbon fibre; these fishing rod walls are made thicker and the rods are heavier and have a lower level of sensitivity. The fishing rod for extreme fishing. Multi-piece fishing rod As the individual pieces are short, the fishing rod takes up minimal space when stowed, making it convenient for short trips and longer travels.

The fishing rod guides have silicon carbide SIC inserts. These wear-resistant guides allow stranded cord to be used for. Original FUJI guides with a silicon carbide insert.

The special ring shape prevents fishing line backlash when casting. Arrangement of the fishing rod guides according to a new concept allows uniform load distribution on the upper blank part of the spinning rod to be achieved.

Small diameter guides in the upper blank part used for this purpose do not disturb the dynamic features of the spinning rod. In this case, the number of Guides is greater than in the case of arrangement by traditional approach.

The fishing rod has special guides on low legs and a reel seat with a trigger intended for use with the multiplier reel. The handle has a special, evaporated coating that lets you easily hold the fishing rod blank, even if its surface is wet.

The convenient shape of the neoprene handle lets you perform continuous manipulations with the fishing rod while fishing, without any discomfort for your hands. The convenient shape of the combination cork and neoprene handle lets you perform continuous manipulations with the fishing rod while fishing without a sense of discomfort for your hands.

The reel is compositeened in the reel seat by the special locking nut, which has a lock that rotates along the line. A case for the fishing rod made of medium rigid transparent plastic. It protects the fishing rod from minor impacts and static loads during transportation. A case for the fishing rod based on a durable plastic frame lined with wear-resistant synthetic fabric. The tube protects fishing rods from the majority of accidental impact and static loads during transportation.

Pole Fishing Rods The product line models are intended for angling on fixed float tackle and can also be used for mormyshka fishing with a strike indicator. All fishing rods, regardless of their categories, meet the basic requirements for this type of fishing and are made of high-quality, durable and lightweight materials. Fishing rods are made with a modern design. A high-quality telescopic fishing rod of fast action and medium rigidity. Made of graphite T40 made in South Korea. Tip diameter for the connector is 1.

A high-quality telescopic fishing rod of mediumfast action and middle rigidity. Made of IM8 graphite. Tip diameter for connector 1. A high-quality telescopic fishing rod of mediumfast action and medium rigidity. Made of graphite IM7. A high-quality telescopic fishing rod of medium action and medium rigidity. An eyelet for fastening tackle is installed on the tip. A high-quality telescopic fishing rod of medium action.

Made of composite. The lash diameter for the connector is 1. The fishing rod is designed so that it does not lose its rigidity or action type, even with its high number of sections. A small, stainless steel ring is installed on the tip of the upper piece for fastening the tackle. A small, stainless steel ring is installed on the tip of the upper piece for fastening the tackle; a screw-cap is installed on the base end of the handle for maintenance of the fishing rod.

Telescopic Float Fishing Rods The range of this multipurpose group is intended for various kinds of fishing, making this group very popular among anglers. The offered fishing rods meet all modern requirements for every price group. The fishing rods are made of durable and lightweight materials. A special design that makes every model unique has been used to manufacture fishing rod blanks. TSTOB TSTOB TSTOB A high-quality lightweight fishing rod of medium capacity and fast action.

The rod is equipped with elegant, lightweight guides, high-quality SIC inserts, on high legs and a reliable reel seat. The upper piece has two additional off-loading guides, and the second piece has one such guide. A high-quality powerful fishing rod of fast action. The most powerful fishing rod among the fishing rods of Team Salmo and Elite series. The rod is equipped with elegant, lightweight guides on high legs with high-quality SIC inserts and a reliable reel seat.

The upper piece has two additional off-loading guides. A high-quality, medium-fast action type and lightweight fishing rod made of IM8 graphite. The fishing rod is equipped with lightweight guides with high-quality SIC insert and a reliable reel seat. A high-quality lightweight fishing rod of medium capacity and medium action, made of graphite IM7. The rod is equipped with lightweight guides on high legs with high-quality SIC inserts and a reliable reel seat.

The upper piece has one additional off-loading guide. A high-quality lightweight fishing rod of medium-fast action and medium capacity, made of graphite IM7. The rod is equipped with lightweight guides with high-quality SIC inserts and a reliable reel seat. The upper piece has two additional off-loading guides, the second piece has one such guide. A classic Bolognese-type fishing rod. A fishing rod with fast action. The rod is equipped with elegant lightweight guides with high-quality SIC inserts on high legs and a reliable reel seat.

A lightweight fishing rod of medium capacity and fast action, made of graphite IM7. The rod is equipped with lightweight guides with highquality SIC inserts and a reliable reel seat. A compact-to-transport fishing rod for float angling, which makes it convenient for camping and business trips.

The design of the fishing rod allows it to retain its rigidity and action even with a great number of pieces. A powerful telescopic fishing rod of medium-fast action. The test of the fishing rod is up to 90 grams. The fishing rod made of IM7 is equipped with durable guides; a special guide ensures the additional reinforcement of the connection of each piece. The guides are equipped with wear-resistant SIC inserts. The handle of the fishing rod is made of cork and equipped with a screw-type reel seat.

Recommended for use as both a float rod for angling with live-bait and a rod for bottom angling. The rod has a small transportation length.

A telescopic fishing rod of medium action made of composite. The upper piece has one additional off-loading guide, the blank is equipped with guides with SIC inserts on one leg. A composite, medium action type telescopic fishing rod, where the two upper pieces are made of IM6 graphite and the other pieces are made of lightweight glass fibre. This combination has allowed the weight of the fishing rod to be decreased and has made easier to hold for a long period of time.

The upper piece has an additional off-loading ring; the blank is equipped with guides with SIC inserts and with fastening on one leg. A telescopic fishing rod of medium action and medium rigidity. Two upper pieces of the rod blank are made of graphite IM7, whereas the remaining guides are made of lightweight glass fibre.

The rod has a small length when assembled for transportation. The rod is equipped with lightweight guides with SIC inserts, the upper piece has one additional off-loading guide, the handle has anti-slip evaporated coating and it is equipped with a fast-action reel seat of the Clip Up type. A medium rigidity, medium action type telescopic ring. The fishing rod has a compactable transportation size. The fishing rod is equipped with lightweight SIC guides; the upper piece has an additional off-loading ring, the handle has an antislip, evaporated coating and a CLIP UP type fast-acting reel seat.

A medium action type telescopic fishing rod made of lightweight glass fibre. A budget series fishing rod of with parameters characteristic of a more expensive series: The upper small lash has an additional off-loading ring; the blank is equipped with guides with SIC inserts and with fastening on one leg; the base has a fast-acting reel seat installed. The upper small lash has an additional off-loading ring. The blank is equipped with Guides with SIC inserts and with soldered fastening to the strengthening ring of every piece.

The handle has a screw-type reel seat installed. Special telescopic fishing rods with guides for angling big fishes — ideal for both live-bait fishing and ground angling with distant lure casting. Their main difference — different test of cast lures.

These powerful fishing rods are made of lightweight glass fibre, are of medium-fast action type and have a lower piece with a small diameter, which gives them an advantage over from similar fishing rods of other manufacturers. The blank is equipped with ceramic guides with soldered fastening to the strengthening ring of every piece; the upper piece has an additional offloading ring; the base handle has a screw-type reel seat installed. All new models have already received the most flattering reviews from expert anglers of different countries.

TEAM SALMO series of spinning rods includes special rods designed for particular methods of angling as well as the most popular method among anglers — regular fishing of predatory fish, such as pike, pike-perch and perch.

We would like to introduce the following groups of spinning rods: VANTAGE spinning rods are designed for a wide scope of application and distinguished by the possibility of using them for jigging lure casting.

TIOGA is the model range of spinning rods intended for trolling, including micro-jig and classic jig. TRENO rods are for twitching and angling with jig-lures.

The rigid blank and specially selected length will ensure the proper animation of lures, whether a wobbler, wobbling spoon bait or a silicon lure. These wobblers will be perfect for jig fishing from a boat. The high-modulus graphite 40T HI-modulus Carbon was used to manufacture the blank.

Different wobblers including big and surface lures, vicelike enough — poppers and walkers, leaders, jigs. In this top series of short spinning rodes of excellent design everything is meticulously checked.

Their supporting design is always usefull in conditions of forced survival. The new spinning rods turned out to be highly elaborate; they simply want to be taken. Moreover, they are distinguished by excellent sensor properties, allowing them to detect even the slightest touch of the lure by the fish, regardless of the type of lure you use — a wobbler, a rotating or swinging spoon-bait, a twister or a jig.

They are designed in accordance to the engineering data provided by proffessionals in the field of spinning fishing from different countries. The top models series are designed for fans of fishing with micro jig and ultralight spinning rods.

The distinctive advantage of these spinning rods is provided due to rigid Solid Tip of the spinning blank made of high-modulus carbon fiber. In this spinning rod design Solid Tip acts as some kind of a sensor significantly rising the tackle sensitivity.

Spinning rods are completed with Zero Tangle Guides preventing the overlap by thin wire lines and equiped with DPS reel seat that can be comfortably held in the hand and makes the spinning rod handle very elegant. EVA material was used for the handle design. And in the case of a heavy haul the spinning rods of this series will not fail you, the strong lower end will not allow to a fish to leave into brush or grass, and a flexible upper end will fully amortize the jerks of the most jumpy surviving fish.

A solid top Solid Top made of high modulus carbon fiber is integrated into the rod design. This spinning rod design turns Solid Tib to be a some kind of a sensor rising the sensitivity of the whole tackle.

The spinning rods are completed with Zero Tangle Guides preventing the overlap by thin wire lines and equiped with VSS reel seat. These spinning rods perfectly match for perch and trout fishing with small wobblers, jig, small turning and swinging blinkers.

The main distinction of the series is its high capacity in its class. The spinning rods are completed with Zero Tangle Guides preventing the overlap by thin wire line and with IPS reel seat. Tioga Rockfish. Rockfishing is becoming increasingly more popular every year, whereas anglers become increasingly more demanding regarding the tackle offered by manufacturers.

The new rods will cheer up anglers with their constant high-quality of execution, excellent casting specifications and the highest sensitivity. This new spinning rod will fit perfectly for those who fancy angling with delicate jerking wobblers and surface lures. The rod is equipped with Fuji guides with SIC inserts.

The medium-heavy power is equally enough both for fishing with these spinning rods with jerking wobblers and surface lures. These spinning rods worked very well in coastal fishing with jig lures. They also work well in multi use: for wobblers fishing, including trolling animation. You surely will stay satisfied with the promptness and the obedience of the blank with minimal accessories weight, that will act according to all your requirements.

This is a really new generation of this class spinning rods. They were specially designed for trout fishing. The length of spinning rods is 1,83 m and 1,98 m. The spinning rods are very light, well balanced and have an exclusive design. Carefully matched furniture emphasises the wonderful features of the blank made of high-modulus graphite. POWDER spinning rods are enabled with high tactual sensitivity, long distance of casting and provides wonderful playing operation. They are efficient for fishing with small lures of different kinds, blinkers, spinner baits, wobblers and superficial lures.

Their blanks come completed with tubular tips Tubular Tip , have medium action, far and precise lures casts within full range of the test. The blanks of these series are made of advanced 40T high-modulus graphite which ensures maximum durability, as well as high sensitivity within the full range of the test.

Blank action types are fast and extra fast. The base of the blank is sufficiently thick, thus ensuring advantage not only when playing the big fish, but also when jerking wobblers.

Material of the knobs is durable and pleasant to touch; it will not lose its consumer properties over many years of use of TRENO spinning rods.

SALMO Spin Fishing Rods The range of this wide and diversified group is intended for meeting the needs of most spinning anglers who fish according to a personal system and with specific lures. This range is represented by various spinning rods, from the ultra-light class to heavy spinning rod models, from fast action type fishing rods to medium action type fishing rods. Their design is created with various modern solutions and materials. Primarily, these are special, high modulus graphites used for professional model lines.

There is a budget spinning rod series, intended for beginning spinning anglers; the material of these rods is a modern, lightweight glass fibre.

Guides, handles and other spinning rod accessories meet modern requirements for the main tool of spin fishing. Event the most inexpensive fishing rod models are made with the use of modern solutions in structure and design.

Special composition of IM8 graphite binders allowed making spinning rod blanks not only fast, but also highly-sensitive. As a result, designers were able to combine the features of a twitching rod and a spinning rod for fishing with jig lures. In any type of fishing these fishing rods show maximum performance. Great handling and high tactile sensitivity of biting are one of the main advantages of spinning rods of this brand.

A high-quality, increased rigidity, fast action type spinning rod made of high modulus IM9 graphite. A series of spinning rods of fast action for fishing with small Ultra Light class jig lures. The blanks are made of IM7 graphite with lightweight guides on high legs with SIC inserts according to a new concept.

Excellent balance and highly sensitive one-piece graphite tip allows detecting even the most delicate biting. The handle of the spinning rod is made of EVA material and equipped with an original design reel seat. A series of spinning rods of fast action for fishing with small Light class jig lures. The handle is made of EVA material and equipped with a screw-type reel seat.

Light class, fast action type spinning rods. The highly sensitive onepiece graphite tip will not only sense the smallest bite, but also ensure casting the most lightweight lure. The spinning rod is equipped with an ergonomic handle made of EVA material.

A lightweight and elegant fast action type spinning rod specially intended for angling with jig lures. The blank has lightweight guides with SIC inserts arranged according to a new concept. The glued tip excellently responds to all contact of the lure with the bottom and cautious biting.

The handle is diverse, made of EVA material and equipped with a reel seat of upper fastening type. A series of spinning rods of medium-fast action for fishing with jig lures. The spinning tip is soft, allowing weak bites to be detected while the lower part of the blank is sufficiently rigid and fast to allow an adequate strike.

The handle is diverse and made of EVA material. A series of spinning rods of fast action for fishing with jig lures. The handle is made of modern synthetic EVA material — durable, pleasant and warm to touch, long-lasting. Diverse handle reduces the weight of the spinning rod and increases its sensitivity. A high-quality medium-fast action type spinning rod made of high modulus IM9 graphite. Recommended for angling with jig lures.

Close length dimensions — cm. A special spinning rod for fishing with jerk baits and large lures for multiplier reel. The blank is made of IM7 graphite and equipped with low profile guides with SIC inserts, as well as with a diverse handle made of EVA material with a screw-type reel seat. To keep the necessary action of the twosection spinning, connection is located close to the handle. The blank is made of IM7 graphite and equipped with low profile and reinforced guides with SIC inserts, as well as with a handle made of EVA material with a screw-type reel seat.

To keep the necessary action of the two-section spinning, connection is located close to the handle. Special spinning rod for angling on jerk baits and large baits.

The blank is made of IM7 graphite, equipped with low guides and a reinforced tulip with SIC inserts and a handle made of natural cork with a screw-type reel seat.

To keep the necessary action type of the two-piece spinning rod, the fastening of pieces is directly next to the handle. Special spinning for fishing with jerk baits and large baits. To keep the necessary action of the two piece spinning, connection is located close to the handle. Special one piece spinning for fishing with jerk baits and large baits. A universal spinning rod of medium rigidity and medium action. This rod is suitable for both angling different fish and fishing with most of the lures: spinners, rotating spoon-baits and wobblers.

The classic arrangement and equipment of the spinning rod with the original design of the blank has an Over Steek connection of pieces.

The spinning rod is equipped with guides with SIC inserts and a reliable screw-type reel seat. A universal spinning rod of medium rigidity and medium-fast action. A rigid and powerful spinning rod of medium-fast action, made of graphite IM7.

Its blank is equipped with lightweight guides with SIC inserts the largest guide has two connection points installed according to a new concept, which will off-load it under the most significant loads.

The spinning rod is equipped with a convenient elongated cork handle with a classic reel seat. The spinning rod is intended for angling big fish using heavy lures.

A special multiplier spin fishing rod for angling by jerk guiding, using medium jerk baits. The blank of the spinning rod is made of graphite IM7 with an Over Steek connection of pieces, it is equipped with guides with SIC inserts and a composite handle made of cork and neoprene.

The multiplier reel is fastened with the upper threaded handle. A special multiplier spin fishing rod for angling by jerk guiding, using medium and large jerk baits. The blank of the spinning rod is made of graphite IM7 with Spigot Joint connection of pieces, it is equipped with guides with SIC inserts and a composite handle made of cork and neoprene. A spinning rod of medium rigidity and medium action. This universal spinning rod is suitable for angling using most of the lures: rotating and wobbling spoon-baits and wobblers, and for angling different fish.

The guides with SIC inserts have classic arrangement of pieces on the blank of the spinning rod, they are fastened on one leg. The connection of pieces is ensured according to Over Steek type, whereas the handle made of natural cork has a reliable screw-type reel seat. A special spinning rod designed for Drop shot fishing. The medium action of this spinning rod meets all the requirements of this type of fishing.

The tip of the spinning rod is soft, allowing to detect weak bites, while the lower part of the blank is sufficiently rigid, allowing for an adequate strike. This spin fishing rod of medium action was designed for angling using jig lures. The blank of the spinning rod has an integrated highly sensitive tip, which allows ensuring the high-quality control over the guiding of the lure.

The lightweight blank of the spinning rod is made of graphite IM7 and has Over Steek connection. It is equipped with guides with SIC inserts. The spin fishing rod of medium-fast action was specifically designed for angling using jig lures. Rod guides: — reinforced single-support — with SIC inserts Handle: — neoprene Reel seat: — screw-type.

A composite, multipurpose, medium-fast action type spinning rod for angling with various lures. The spinning rod blank is equipped with lightweight guides with SIC inserts on high legs and an elegant cork handle and a lightweight buffer on the base end. All spinning rods have the same test. The spin fishing rod for angling on jig baits. The spinning rod blank of medium-fast action type is made of composite and a sensitive tip of graphite.

The spinning rod is equipped with lightweight guides with SIC inserts, the elegant handle with cork covering and the reliable screw reel seat. A composite, multipurpose medium action type spinning rod.

The handle has a classic reel seat with a lower fastening type and a plastic tip on the base end. A composite, medium action type, compact telescopic fishing rod made, equipped with reliable guides with SIC inserts. The cork handle with a lower nut of fastening the reel has a technological plastic screw-cap on the base end. The spinning rod blank is made of lightweight glass fibre; the sensitive hollow tip is glued on its upper part.

The guides are equipped with SIC inserts. The spinning rod blank has a neoprene handle with screw-type reel fastening. A series of inexpensive, medium-fast action type spin fishing rods made of glass fibre. The spinning rod has IN STEEK type fastening of pieces, a neoprene handle with classic reel fastening with a lower fastening nut and guides with SIC inserts installed on one fastening leg.

A multipurpose, economy class telescopic spinning rod made of lightweight glass fibre. The fishing rod is equipped with ceramic guides with the soldered fastening of each ring to the upper support ring. The handle is made of neoprene and equipped with a screw-type reel seat with a lower fastening nut. Working the bait at depths should be clearly visible by the spinning rod tip while being guiding.

Powerful and reliable guides, a rigid blank with a soft tip, increased handle length — all of this is individually designed by specialists for each fishing rod. All fishing rods of this model series are designed for fighting the strongest fish. A powerful, medium-fast action type spin fishing rod for angling big fish from a boat, primarily for trolling. The blank is made of composite, with a grown-in transparent glass-fibre plastic tip. This powerful trolling rod is intended for trolling big fish.

The very durable fishing rod blank is made of composite materials and has a grown-in transparent glass-fibre plastic tip. The sensitive tip clearly responds to bait being worked at depths. It is able to withstand loads that bend it to negative angles when playing a fish.

Over Steek connection of the fishing rod. The blank is equipped with reinforced guides with SIC inserts, a convenient neoprene handle with a reliable screw-type reel seat.

A powerful trolling rod intended for trolling big fish. Extremely powerful rod for angling by using the baits up to g. In particular, the Parties agree. Each Party shall ensure that economic operators and other interested persons of the other Party are allowed to participate in any formal public consultative process concerning development of technical regulations, on terms no less favourable than those accorded to its own legal or natural persons.

Each Party shall endeavour to apply technical regulations uniformly and consistently throughout its territory. If Korea notifies the EU Party of an issue of trade that appears to arise from variations in the legislation of the Member States of the European Union that Korea considers not to be compatible with the Treaty on the Functioning of the European Union, the EU Party will make its best endeavours to address the issue in a timely manner.

The Parties reconfirm their obligations under Article 4. The Parties recognise that a broad range of mechanisms exist to facilitate the acceptance of the results of conformity assessment procedures conducted in the territory of the other Party, including:. Principles and procedures established in respect of development and adoption of technical regulations under Article 4. The Parties reaffirm their obligation under Article 5.

The Parties note the provision of paragraph 1 of Annex 1 of the TBT Agreement, that a technical regulation may include or deal exclusively with marking or labelling requirements, and agree that where their technical regulations contain mandatory marking or labelling, they will observe the principles of Article 2. In particular, the Parties agree that where a Party requires mandatory marking or labelling of products:. Where labelling for other purposes, for example, for fiscal purposes is required, such a requirement shall be formulated in a manner that is not more trade restrictive than necessary to fulfil a legitimate objective;.

This provision is without prejudice to the right of the Party to require prior approval of the specific information to be provided on the label or marking in the light of the relevant domestic regulation;. Where there is an international system of nomenclature accepted by the Parties, this may also be used.

The simultaneous use of other languages shall not be prohibited, provided that, either the information provided in the other languages shall be identical to that provided in the specified language, or that the information provided in the additional language shall not constitute a deceptive statement regarding the product; and. The TBT Coordinators shall work jointly in order to facilitate the implementation of this Chapter and cooperation between the Parties in all matters pertaining to this Chapter.

The Coordinators shall communicate with one another by any agreed method that is appropriate for the efficient and effective discharge of their functions. Furthermore, this Chapter aims to enhance cooperation between the Parties on animal welfare issues, taking into consideration various factors such as livestock industry conditions of the Parties.

This Chapter applies to all sanitary and phytosanitary measures of a Party that may, directly or indirectly, affect trade between the Parties. For the purposes of this Chapter, sanitary or phytosanitary measure means any measure defined in paragraph 1 of Annex A of the SPS Agreement. The general import requirements of a Party shall apply to the entire territory of the other Party. Additional specific import requirements may be imposed on the exporting Party or parts thereof based on the determination of the animal or plant health status of the exporting Party or parts thereof made by the importing Party in accordance with the SPS Agreement, the Codex Alimentarius Commission, the World Organisation for Animal Health hereinafter referred to as the "OIE" and the International Plant Protection Convention hereinafter referred to as the "IPPC" guidelines and standards.

The Parties shall recognise the concept of pest- or disease-free areas and areas of low pest or disease prevalence, in accordance with the SPS Agreement, OIE and IPPC standards, and shall establish an appropriate procedure for the recognition of such areas, taking into account any relevant international standard, guideline or recommendation.

When determining such areas, the Parties shall consider factors such as geographical location, ecosystems, epidemiological surveillance and the effectiveness of sanitary or phytosanitary controls in such areas.

The Parties shall establish close cooperation on the determination of pest- or disease-free areas and areas of low pest or disease prevalence with the objective of acquiring confidence in the procedures followed by each Party for the determination of such areas. The Parties shall endeavour to complete this confidence-building activity within about two years from the entry into force of this Agreement. The successful completion of the confidence-building cooperation shall be confirmed by the Committee on Sanitary and Phytosanitary Measures referred to in Article 5.

When determining such areas, the importing Party shall in principle base its own determination of the animal or plant health status of the exporting Party or parts thereof on the information provided by the exporting Party in accordance with the SPS Agreement, OIE and IPPC standards, and take into consideration the determination made by the exporting Party.

In this connection, if a Party does not accept the determination made by the other Party, the Party not accepting the determination shall explain the reasons and shall be ready to enter into consultations. The exporting Party shall provide necessary evidence in order to objectively demonstrate to the importing Party that such areas are, and are likely to remain, pest- or disease-free areas and areas of low pest or disease prevalence, respectively.

For this purpose, reasonable access shall be given, upon request, to the importing Party for inspection, testing and other relevant procedures. In this connection, the Committee shall be convened as a matter of urgency, at the request of a Party, so as to carry out consultations.

The Committee shall be comprised of representatives of the Parties and shall meet once a year on a mutually agreed date. The venue of meetings shall also be mutually agreed. The agenda shall be agreed before the meetings. The chairmanship shall alternate between the Parties.

With the objectives of facilitating trade and promoting customs cooperation on a bilateral and multilateral basis, the Parties agree to cooperate and to adopt and apply their import, export and transit requirements and procedures for goods on the basis of the following objectives and principles:.

Each Party shall adopt and apply simplified and efficient customs and other trade-related requirements and procedures in order to facilitate trade between the Parties. Pursuant to paragraph 1, each Party shall ensure that its customs authorities, border agencies or other competent authorities apply requirements and procedures that:.

Each Party shall work to further reduce release time;. The Parties shall endeavour to apply simplified import and export procedures for traders or economic operators which meet specific criteria decided by a Party, providing in particular more rapid release and clearance of goods, including advance electronic submission and processing of information before physical arrival of consignments, a lower incidence of physical inspections, and facilitation of trade with regard to, for example, simplified declarations with a minimum of documentation.

Each Party shall apply risk management systems, to the extent possible in an electronic manner, for risk analysis and targeting that enable its customs authorities to focus inspection activities on high-risk goods and that simplify the clearance and movement of low-risk goods.

Each Party shall ensure that its customs and other trade-related laws, regulations and general administrative procedures and other requirements, including fees and charges, are readily available to all interested parties, via an officially designated medium, and where feasible and possible, official website. Each Party shall designate or maintain one or more inquiry or information points to address inquiries by interested persons concerning customs and other trade-related matters.

Each Party shall consult with, and provide information to, representatives of the trading community and other interested parties. Such consultations and information shall cover significant new or amended requirements and procedures and the opportunity to comment shall be provided prior to their adoption. Upon written request from traders, each Party shall issue written advance rulings, through its customs authorities, prior to the importation of a good into its territory in accordance with its laws and regulations, on tariff classification, origin or any other such matters as the Party may decide.

Subject to any confidentiality requirements in its laws and regulations, each Party shall publish, e. To facilitate trade, the Parties shall include in their bilateral dialogue regular updates on changes in their respective legislation on the matters referred to in paragraphs 1 and 2. Each Party shall ensure that with respect to its determinations on customs matters and other import, export and transit requirements and procedures, persons concerned who are the subject of such determinations shall have access to review or appeal of such determinations.

A Party may require that an appeal be initially heard by the same agency, its supervisory authority or a judicial authority prior to a review by a higher independent body, which may be a judicial authority or administrative tribunal.

The producer or exporter may provide, upon request of the reviewing authority to the producer or exporter, information directly to the Party conducting the administrative review. The exporter or producer providing the information may ask the Party conducting the administrative review to treat that information as confidential in accordance with its laws and regulations.

Any information provided by persons or authorities of a Party to the authorities of the other Party pursuant to the provisions of this Chapter shall, including where requested pursuant to Article 6. It shall be covered by the obligation of official secrecy and shall enjoy the protection extended to similar information under the relevant laws and regulations of the Party that received it.

Personal data may be exchanged only where the Party receiving the data undertakes to protect such data in a manner at least equivalent to that applicable to that particular case in the Party that may supply them. The person providing information shall not stipulate any requirements which are more onerous than those applicable to it in its own jurisdiction.

Information referred to in paragraph 1 shall not be used by the authorities of the Party which has received it for purposes other than those for which it was provided without the express permission of the person or authority providing it. Other than with the express permission of the person or authority that provided it, the information referred to in paragraph 1 shall not be published or otherwise disclosed to any persons, except where obliged or authorised to do so under the laws and regulations of the Party that received it in connection with legal proceedings.

The person or authority that provided the information shall be notified of such disclosure, wherever possible, in advance. Where an authority of a Party requests information pursuant to the provisions of this Chapter, it shall notify the requested persons of any possibility of disclosure in connection with legal proceedings.

The requesting Party shall, unless otherwise agreed by the person who provided the information, wherever appropriate, use all available measures under the applicable laws and regulations of that Party to maintain the confidentiality of information and to protect personal data in case of applications by a third party or other authorities for the disclosure of the information concerned.

With regard to all fees and charges of whatever character other than customs duties and the items that are excluded from the definition of a customs duty under Article 2. This information shall include the reason for the fee or charge for the service provided, the responsible authority, the fees and charges that will be applied, and when and how payment is to be made; and. Each Party shall provide traders with the opportunity to benefit from the application of efficient post clearance audits.

The application of post clearance audits shall not impose unwarranted or unjustified requirements or burdens on traders. The Customs Valuation Agreement without the reservations and options provided for in Article 20 and paragraphs 2 through 4 of Annex III of the Customs Valuation Agreement shall be incorporated into and made part of this Agreement, mutatis mutandis. The Parties undertake to develop trade facilitation actions in customs matters taking account of the work done in this connection by international organisations.

This may include testing of new customs procedures. The Parties affirm their commitment to the facilitation of the legitimate movement of goods and shall exchange expertise on measures to improve customs techniques and procedures and on computerised systems in accordance with the provisions of this Agreement.

The Parties agree that the objectives of the intensified and broadened cooperation include, but are not limited to:. The Parties recognise that technical cooperation between them is fundamental to facilitating compliance with the obligations set forth in this Agreement and to achieving high levels of trade facilitation. The Parties, through their customs administrations, agree to develop a technical cooperation programme under mutually agreed terms as to the scope, timing and cost of cooperative measures in customs and customs-related areas.

The Parties shall work together to establish, wherever possible, common positions in international organisations in the field of customs and trade facilitation, notably in the WTO and WCO. The Parties shall assist each other in implementation and enforcement of this Chapter, the Protocol concerning the Definition of "Originating Products" and Methods of Administrative Cooperation, and their respective customs laws or regulations.

The Parties shall provide mutual administrative assistance in customs matters in accordance with the provisions laid down in the Protocol on Mutual Administrative Assistance in Customs Matters. The Parties shall exchange lists of designated contact points for matters arising under this Chapter and the Protocol concerning the Definition of "Originating Products" and Methods of Administrative Cooperation.

The contact points shall endeavour to resolve operational matters covered by this Chapter through consultations. If a matter cannot be resolved through the contact points, the matter shall be referred to the Customs Committee referred to in this Chapter. The Customs Committee established pursuant to Article For matters covered by this Agreement, it shall report to the Trade Committee set up under Article The Customs Committee shall consist of representatives of the customs and other competent authorities of the Parties responsible for customs and trade facilitation matters, for the management of the Protocol concerning the Definition of "Originating Products" and Methods of Administrative Cooperation and the Protocol on Mutual Administrative Assistance in Customs Matters.

The Customs Committee shall adopt its rules of procedure and meet annually, the location of the meeting alternating between the Parties. On the request of a Party, the Customs Committee shall meet to discuss and endeavour to resolve any difference that may arise between the Parties on matters as included in this Chapter and the Protocol concerning the Definition of "Originating Products" and Methods of Administrative Cooperation and the Protocol on Mutual Administrative Assistance in Customs Matters, including trade facilitation, tariff classification, origin of goods and mutual administrative assistance in customs matters, in particular relating to Articles 7 and 8 of the Protocol on Mutual Administrative Assistance in Customs Matters.

The Customs Committee may formulate resolutions, recommendations or opinions which it considers necessary for the attainment of the common objectives and sound functioning of the mechanisms established in this Chapter and the Protocol concerning the Definition of "Originating Products" and Methods of Administrative Cooperation and the Protocol on Mutual Administrative Assistance in Customs Matters. The Parties, reaffirming their respective rights and obligations under the WTO Agreement, hereby lay down the necessary arrangements for progressive reciprocal liberalisation of trade in services and establishment and for cooperation on electronic commerce.

Nothing in this Chapter shall be construed to impose any obligation with respect to government procurement. This Chapter shall not apply to subsidies or grants provided by a Party, including government-supported loans, guarantees and insurance. Consistent with this Chapter, each Party retains the right to regulate and to introduce new regulations to meet legitimate policy objectives. This Chapter shall not apply to measures affecting natural persons seeking access to the employment market of a Party, nor shall it apply to measures regarding citizenship, residence or employment on a permanent basis.

Should the juridical person have only its registered office or central administration in the territory to which the Treaty on European Union and the Treaty on the Functioning of the European Union apply or of Korea, it shall not be considered as a juridical person of the European Union or of Korea respectively, unless it engages in substantive business operations [6] in the territory to which the Treaty on European Union and the Treaty on the Functioning of the European Union apply or of Korea respectively; or.

These activities do not include the pricing of air transport services, nor the applicable conditions; and. The principal representative of the Parties for the Committee shall be an official of its authority responsible for the implementation of this Chapter. This Section applies to measures of the Parties affecting the cross-border supply of all service sectors with the exception of:.

With respect to market access through the cross-border supply of services, each Party shall accord to services and service suppliers of the other Party treatment no less favourable than that provided for under the terms, limitations and conditions agreed and specified in the specific commitments contained in Annex 7-A.

In sectors where market access commitments are undertaken, the measures which a Party shall not adopt or maintain either on the basis of a regional subdivision or on the basis of its entire territory, unless otherwise specified in Annex 7-A, are defined as:. In the sectors where market access commitments are inscribed in Annex 7-A and subject to any conditions and qualifications set out therein, each Party shall accord to services and service suppliers of the other Party, in respect of all measures affecting the cross-border supply of services, treatment no less favourable than that it accords to its own like services and service suppliers.

A Party may meet the requirement of paragraph 1 by according to services and service suppliers of the other Party, either formally identical treatment or formally different treatment to that it accords to its own like services and service suppliers. Formally identical or formally different treatment shall be considered to be less favourable if it modifies the conditions of competition in favour of services or service suppliers of a Party compared to like services or service suppliers of the other Party.

Specific commitments assumed under this Article shall not be construed to require any Party to compensate for any inherent competitive disadvantages which result from the foreign character of the relevant services or service suppliers. The sectors liberalised by each Party pursuant to this Section and, by means of reservations, the market access and national treatment limitations applicable to services and service suppliers of the other Party in those sectors are set out in the lists of commitments included in Annex 7-A.

Neither Party may adopt new, or more, discriminatory measures with regard to services or service suppliers of the other Party in comparison with treatment accorded pursuant to the specific commitments undertaken in conformity with paragraph 1.

With respect to any measures covered by this Section affecting the cross-border supply of services, unless otherwise provided for in this Article, each Party shall accord to services and service suppliers of the other Party treatment no less favourable than that it accords to like services and service suppliers of any third country in the context of an economic integration agreement signed after the entry into force of this Agreement. Treatment arising from a regional economic integration agreement granted by either Party to services and service suppliers of a third party shall be excluded from the obligation in paragraph 1, only if this treatment is granted under sectoral or horizontal commitments for which the regional economic integration agreement stipulates a significantly higher level of obligations than those undertaken in the context of this Section as set out in Annex 7-B.

Notwithstanding paragraph 2, the obligations arising from paragraph 1 shall not apply to treatment granted:. This Chapter shall not be so construed as to prevent any Party from conferring or according advantages to adjacent countries in order to facilitate exchanges limited to contiguous frontier zone of services that are both locally produced and consumed.

With a view to improving the investment environment, and in particular the conditions of establishment between the Parties, this Section applies to measures by the Parties affecting establishment [14] in all economic activities with the exception of:. With respect to market access through establishment, each Party shall accord to establishments and investors of the other Party treatment no less favourable than that provided for under the terms, limitations and conditions agreed and specified in the specific commitments contained in Annex 7-A.

In the sectors inscribed in Annex 7-A, and subject to any conditions and qualifications set out therein, with respect to all measures affecting establishment, each Party shall accord to establishments and investors of the other Party treatment no less favourable than that it accords to its own like establishments and investors. A Party may meet the requirement of paragraph 1 by according to establishments and investors of the other Party, either formally identical treatment or formally different treatment to that it accords to its own like establishments and investors.

Formally identical or formally different treatment shall be considered to be less favourable if it modifies the conditions of competition in favour of establishments or investors of the Party compared to like establishments or investors of the other Party.

Specific commitments assumed under this Article shall not be construed to require any Party to compensate for any inherent competitive disadvantages which result from the foreign character of the relevant establishments or investors.

The sectors liberalised by each Party pursuant to this Section and, by means of reservations, the market access and national treatment limitations applicable to establishments and investors of the other Party in those sectors are set out in the lists of commitments included in Annex 7-A. Neither Party may adopt new, or more, discriminatory measures with regard to establishments and investors of the other Party in comparison with treatment accorded pursuant to the specific commitments undertaken in conformity with paragraph 1.

With respect to any measures covered by this Section affecting establishment, unless otherwise provided for in this Article, each Party shall accord to establishments and investors of the other Party treatment no less favourable than that it accords to like establishments and investors of any third country in the context of an economic integration agreement signed after the entry into force of this Agreement [21].

Treatment arising from a regional economic integration agreement granted by either Party to establishments and investors of a third party shall be excluded from the obligation in paragraph 1, only if this treatment is granted under sectoral or horizontal commitments for which the regional economic integration agreement stipulates a significantly higher level of obligations than those undertaken in the context of this Section as set out in Annex 7-B.

With a view to progressively liberalising investments, the Parties shall review the investment legal framework [22], the investment environment and the flow of investment between them consistently with their commitments in international agreements no later than three years after the entry into force of this Agreement and at regular intervals thereafter.

In the context of the review referred to in paragraph 1, the Parties shall assess any obstacles to investment that have been encountered and shall undertake negotiations to address such obstacles, with a view to deepening the provisions of this Chapter, including with respect to general principles of investment protection.

This Section applies to measures of the Parties concerning the entry into, and temporary stay in, their territories of key personnel, graduate trainees, business services sellers, contractual service suppliers and independent professionals subject to Article 7.

Key personnel comprise business visitors responsible for setting up an establishment and intra-corporate transferees;. They do not engage in direct transactions with the general public and do not receive remuneration from a source located within the host Party; and. The natural person concerned shall belong to one of the following categories.

Natural persons working in a senior position within a juridical person, who primarily direct the management of the establishment, receiving general supervision or direction principally from the board of directors or shareholders of the business or their equivalents, including:. B supervising and controlling the work of other supervisory, professional or managerial employees; and. C having the authority personally to recruit and dismiss or recommend recruiting, dismissing or other personnel actions.

In assessing such knowledge, account will be taken not only of knowledge specific to the establishment, but also of whether the person has a high level of qualification referring to a type of work or trade requiring specific technical knowledge, including membership of an accredited profession. They do not engage in making direct sales to the general public and do not receive remuneration from a source located within the host Party;. For every sector liberalised in accordance with Section C and subject to any reservations listed in Annex 7-A, each Party shall allow investors of the other Party to transfer to their establishment natural persons of that other Party, provided that such employees are key personnel or graduate trainees as defined in Article 7.

The temporary entry and stay of key personnel and graduate trainees shall be permitted for a period of up to three years for intra-corporate transferees [26], 90 days in any 12 month period for business visitors [27], and one year for graduate trainees.

For every sector liberalised in accordance with Section C, the measures which a Party shall not maintain or adopt, unless otherwise specified in Annex 7-A, are defined as limitations on the total number of natural persons that an investor may transfer as key personnel or graduate trainees in a specific sector in the form of numerical quotas or a requirement of an economic needs test and as discriminatory limitations [28].

For every sector liberalised in accordance with Section B or C and subject to any reservations listed in Annex 7-A, each Party shall allow the temporary entry and stay of business service sellers for a period of up to 90 days in any 12 month period [29]. The Parties reaffirm their respective obligations arising from their commitments under the GATS as regards the temporary entry and stay of contractual service suppliers and independent professionals.

No later than two years after the conclusion of the negotiations pursuant to Article XIX of GATS and to the Ministerial Declaration of the WTO Ministerial Conference adopted on 14 November , the Trade Committee shall adopt a decision containing a list of commitments concerning the access of contractual service suppliers and independent professionals of a Party to the territory of the other Party.

Taking into account the results of those GATS negotiations, the commitments shall be mutually beneficial and commercially meaningful. The Parties shall encourage the relevant representative professional bodies in their respective territories to jointly develop and provide recommendations on mutual recognition to the Trade Committee, for the purpose of the fulfilment, in whole or in part, by service suppliers and investors in services sectors, of the criteria applied by each Party for the authorisation, licensing, operation and certification of service suppliers and investors in services sectors and, in particular, professional services, including temporary licensing.

On receipt of a recommendation referred to in paragraph 2, the Trade Committee shall, within a reasonable time, review the recommendation with a view to determining whether it is consistent with this Agreement.

When, in conformity with the procedure set out in paragraph 3, a recommendation referred to in paragraph 2 has been found to be consistent with this Agreement and there is a sufficient level of correspondence between the relevant regulations of the Parties, the Parties shall, with a view to implementing that recommendation, negotiate, through their competent authorities, an agreement on mutual recognition hereinafter referred to as an "MRA" of requirements, qualifications, licences and other regulations.

With a view to facilitating the activities referred to in paragraph 2, the Working Group shall meet within one year of the entry into force of this Agreement, unless the Parties agree otherwise.

The Parties, through the mechanisms established pursuant to Chapter Twelve Transparency , shall respond promptly to all requests by the other Party for specific information on:. Such standards and criteria include requirements regarding education, examination, experience, conduct and ethics, professional development and re-certification, scope of practice, local knowledge and consumer protection.

Nothing in this Agreement shall require any Party to provide confidential information, the disclosure of which would impede law enforcement, or otherwise be contrary to the public interests, or which would prejudice legitimate commercial interests of particular enterprises, public or private. If the authority requires additional information from the applicant, it shall notify the applicant without undue delay.

On the request of an unsuccessful applicant, a regulatory authority that has denied an application shall, to the extent possible, inform the applicant of the reasons for denial of the application. An application shall not be considered complete until all relevant hearings are held and all necessary information is received.

Where it is not possible for a decision to be made within days, the regulatory authority shall notify the applicant without undue delay and shall endeavour to make the decision within a reasonable period of time thereafter. Where authorisation is required for the supply of a service or for establishment on which a specific commitment has been made, the competent authorities of a Party shall, within a reasonable period of time after the submission of an application considered complete under domestic laws and regulations, inform the applicant of the decision concerning the application.

At the request of the applicant, the competent authorities of the Party shall provide, without undue delay, information concerning the status of the application. Each Party shall institute or maintain judicial, arbitral or administrative tribunals or procedures which provide, at the request of an affected investor or service supplier, for a prompt review of, and where justified, appropriate remedies for, administrative decisions affecting establishment, cross-border supply of services or temporary presence of natural persons for business purpose.

Where such procedures are not independent of the agency entrusted with the administrative decision concerned, the Parties shall ensure that the procedures in fact provide for an objective and impartial review.

With a view to ensuring that measures relating to qualification requirements and procedures, technical standards and licensing requirements do not constitute unnecessary barriers to trade in services, while recognising the right to regulate and to introduce new regulations on the supply of services in order to meet public policy objectives, each Party shall endeavour to ensure, as appropriate for individual sectors, that such measures are:.

This Article shall be amended, as appropriate, after consultations between the Parties, to bring under this Agreement the results of the negotiations pursuant to paragraph 4 of Article VI of GATS or the results of any similar negotiations undertaken in other multilateral fora in which both Parties participate once they become effective.

Each Party shall, to the extent practicable, ensure that internationally agreed standards for regulation and supervision in the financial services sector and for the fight against tax evasion and avoidance are implemented and applied in its territory.

In liberalising trade in computer services in accordance with Sections B through D, the Parties subscribe to the understanding set out in the following paragraphs. CPC [30] 84, the United Nations code used for describing computer and related services, covers the basic functions used to provide all computer and related services including computer programs defined as the sets of instructions required to make computers work and communicate including their development and implementation , data processing and storage, and related services, such as consultancy and training services for staff of clients.

Technological developments have led to the increased offering of these services as a bundle or package of related services that can include some or all of these basic functions. For example, services such as web or domain hosting, data mining services and grid computing consist of a combination of basic computer services functions respectively.

Original FUJI guides with a silicon carbide insert. The special ring shape prevents fishing line backlash when casting. Arrangement of the fishing rod guides according to a new concept allows uniform load distribution on the upper blank part of the spinning rod to be achieved. Small diameter guides in the upper blank part used for this purpose do not disturb the dynamic features of the spinning rod.

In this case, the number of Guides is greater than in the case of arrangement by traditional approach. The fishing rod has special guides on low legs and a reel seat with a trigger intended for use with the multiplier reel. The handle has a special, evaporated coating that lets you easily hold the fishing rod blank, even if its surface is wet.

The convenient shape of the neoprene handle lets you perform continuous manipulations with the fishing rod while fishing, without any discomfort for your hands. The convenient shape of the combination cork and neoprene handle lets you perform continuous manipulations with the fishing rod while fishing without a sense of discomfort for your hands.

The reel is fastened in the reel seat by the special locking nut, which has a lock that rotates along the line.

A case for the fishing rod made of medium rigid transparent plastic. It protects the fishing rod from minor impacts and static loads during transportation. A case for the fishing rod based on a durable plastic frame lined with wear-resistant synthetic fabric. The tube protects fishing rods from the majority of accidental impact and static loads during transportation.

The product line models are intended for angling on fixed float tackle and can also be used for. All fishing rods, regardless of their categories, meet the basic requirements for this type of fishing and are made of high-quality, durable and lightweight materials. Fishing rods are made with a modern design.

High quality medium-hard quick assembly telescopic rod. Made of T40 graphite. Tip diameter for connector 1. High quality medium action telescopic rod. Made of IM7 graphite. High-quality telescopic fishing rod of fast action type of medium rigidity. It is made of graphite IM7. Lash diameter for the connector is 1. An eyelet for fastening tackle is installed on the tip.

This option has made it possible to reduce the weight of the upper part of the fishing rod, which makes it easy to hold with one hand for a long period of time. The lash diameter for the connector is 1. A fishing rod for blind tackle that is one of the most compact rods when transported, making it convenient for short trips and longer travels.

The fishing rod is designed so that it does not lose its rigidity or action type, even with its high number of sections. A small, stainless steel ring is installed on the tip of the upper piece for fastening the tackle. The telescopic fishing rod is made of lightweight glass fibre, which has allows the fishing rod to have a medium action type.

A small, stainless steel ring is installed on the tip of the upper piece for fastening the tackle; a screw-cap is installed on the base end of the handle for maintenance of the fishing rod. The range of this multipurpose group is intended for various kinds of fishing, making this group very popular among anglers. The offered fishing rods meet all modern requirements for every price group. The fishing rods are made of durable and lightweight materials.

A special design that makes every model unique has been used to manufacture fishing rod blanks. A fast action type, high-quality and lightweight medium power fishing rod. The fishing rod is equipped with elegant, lightweight guides with high-quality SIC inserts on high legs and a reliable reel seat.

The upper piece has two additional off-loading guides. High quality fast action Bolognese rod. The rod is equipped with light guides with high quality SIC inserts, on high legs and reliable reel seat. Upper section has additional off-loading guide. High quality medium action Bolognese rod, made of IM7 graphite. The rod is equipped by light guides with high quality SIC inserts and reliable reel seat. Medium rigidity, medium-fast action type fishing rod. A high-quality, medium power, medium-fast action type, lightweight fishing rod made of IM7 graphite.

The fishing rod is equipped with lightweight guides with high-quality SIC inserts and a reliable reel seat. A composite, medium action type telescopic fishing rod, where the two upper pieces are made of IM6 graphite and the other pieces are made of lightweight glass fibre. This combination has allowed the weight of the fishing rod to be decreased and has made easier to hold for a long period of time.

The upper piece has an additional off-loading ring; the blank is equipped with guides with SIC inserts and with fastening on one leg. A powerful medium-fast action type telescopic fishing rod. Fishing rod tests are up to 90 grams. The fishing rod made of IM7 graphite is equipped with durable Guides; a special ring additionally strengthens the junction of every piece. The Guides have wear-resistant SIC inserts installed. The fishing rod handle is made of cork and equipped with the screw-on reel seat.

It is recommended to use it not only as a float fishing rod for live-bait fishing, but also as a fishing rod for ground angling. The fishing rod has can be compacted for easy transportation. A medium rigidity, medium action type telescopic ring. The two upper pieces are made of IM7 graphite and the other pieces are made of lightweight glass fibre.

The fishing rod has a compactable transportation size. The fishing rod is equipped with lightweight SIC guides; the upper piece has an additional off-loading ring, the handle has an anti-slip, evaporated coating and a CLIP UP type fast-acting reel seat.

An increased durability, medium action type telescopic fishing rod with a composite blank equipped with guides with ceramic inserts. The upper small lash has an additional off-loading ring.

The blank is equipped with Guides with soldered fastening to the strengthening ring of every piece. The base part of the fishing rod is equipped with a tennis-type handle with a screw-type reel seat.

A medium action type telescopic fishing rod made of lightweight glass fibre. A budget series fishing rod of with parameters characteristic of a more expensive series: The upper small lash has an additional off-loading ring; the blank is equipped with guides with SIC inserts and with fastening on one leg; the base has a fast-acting reel seat installed.

The blank is equipped with Guides with SIC inserts and with soldered fastening to the strengthening ring of every piece. The handle has a screw-type reel seat installed. The blank is equipped with ceramic guides with soldered fastening to the strengthening ring of every piece; the upper piece has an additional off-loading ring; the base handle has a screw-type reel seat installed.

This range of high-quality spinning rods group is intended for most methods of fishing on any medium-weight lures: wobblers, spoon baits and jig baits. These fishing rods are made at the factory with up-to-date equipment and the strictest control of the production process at all production. The models are made in the best traditions of the Japanese industry of spin fishing rod production. The blanks are made of high-quality, high modulus graphite. The latest materials and components are used in the production of the fishing rods.

The excellent accessories, action type and design of the fishing rod place these spinning rods among the most worthy tools of spinning anglers. A fast action type, high-class spinning rod with an arrangement of guides according to a new concept. The spinning rod blank is made with an original matte design. The diverse handle reduces the spinning rod weight and increases its sensitivity. The spinning rod is multipurpose. The fast action type spinning rod with an arrangement of guides according to a new concept.

The original diverse handle of the spinning rod is made of EVA material — this reduces its weight and increases its sensitivity. Very lightweight, fast action type spinning rod of.

The range of this wide and diversified group is intended for meeting the needs of most spinning anglers who fish according to a personal system and with specific lures.

This range is represented by various spinning rods, from the ultra-light class to heavy spinning rod models, from fast action type fishing rods to medium action type fishing rods. Their design is created with various modern solutions and materials. Primarily, these are special, high modulus graphites used for professional model lines. There is a budget spinning rod series, intended for beginning spinning anglers; the material of these rods is a modern, lightweight glass fibre.

Guides, handles and other spinning rod accessories meet modern requirements for the main tool of spin fishing. Event the most inexpensive fishing rod models are made with the use of modern solutions in structure and design.

The multipurpose, medium rigidity, medium-fast action type spinning rod is made of high modulus IM9 graphite with an arrangement of guides according to a new concept. The spinning rod is equipped with a convenient and reliable FUJI reel seat, lightweight high-quality guides on high legs with SIC inserts. Detachable counterweights that help precisely balance the spinning rod for the reel are placed on the base end of the cork handle.

An elegant, medium action type high-class spinning rod made of high modulus IM9 graphite. The spinning rod blank is of medium rigidity, very well-casting and equipped with lightweight SIC guides on high legs. Spinning rods of and cm length have a type 1 handle; rods and cm in length have a type 2 handle. The guides with SIC inserts are arranged according to a new concept. The spinning rod blank is of medium rigidity and very well-casting. The elegant cork handle with a diameter that varies along its length is very convenient when operating a spinning rod intended for angling with wobblers, rotating and wobbling spoon baits.

A high-quality, increased rigidity, fast action type spinning rod made of high modulus IM9 graphite. A high-quality, medium-fast action type spinning rod made of high modulus IM9 graphite. High-quality, medium-fast action type spinning rod made of IM7 graphite.

Lightweight guides with SIC inserts are arranged on the blank according to a new concept. The spinning rod blank is additionally reinforced with a special carbon fibre weave. The original reel seat is made of durable aluminium alloy. Close length dimensions — cm. Handle is made of modern synthetic material — EVA — wear resistant, smooth and warm to the touch, long on performance.

Diversed handle reduces the weight of the spinning and improves its sensitivity. A series of fast action type spinning rods for angling with small, Light class jig baits of. The blanks are made of IM7 graphite with lightweight guides on high legs with SIC inserts according to a new concept.

Excellent balance and a very sensitive graphite tip detect even the most delicate biting. The cork handle of the spinning rod is equipped with an original design reel seat. Light class, fast action type spin fishing rods. The highly sensitive onepiece graphite tip will sense not only the smallest bite, but also ensure casting the most lightweight lure. Very lightweight and elegant spinning rod, specially intended for angling with jig baits. The blank has lightweight guides with SIC inserts installed according to a new concept.

The glued tip excellently responds to all contact with the bottom of the bait and cautious biting. The balancing damper is installed on the cork handle base end. To keep the necessary action of the two piece spinning, connection is located close to the handle. Special spinning rod for angling on jerk baits and large baits. The spinning rod is also suitable for angling pike on weedless spoon baits in grass brushes, where you need to deal quickly with predatory fish.

Special spinning rod for angling with jerk baits and big baits for the multiplier reel. The blank is made of IM7 graphite, equipped with low guides and a reinforced tulip with SIC inserts and a handle made of natural cork with a screw-type reel seat.

To keep the necessary action type of the two-piece spinning rod, the fastening of pieces is directly next to the handle.

This spinning rod has a medium-fast action type that meets all requirements of this fishing method. The spinning rod tip is soft, which allows weak biting to be detected and the lower part of the blank is sufficiently rigid and fast, making high-quality hooking possible. The multipurpose, well-casting, well-balanced, medium-fast action type spinning rod for angling with multiplier reels.

The spinning rod blank is reinforced with Kevlar armour and made of IM7 graphite. The low-seated guides are equipped with SIC inserts. The blank is equipped with lightweight guides with SIC inserts, a convenient ergonomic cork handle and a reliable screwtype reel seat. The spinning rod is excellently balanced and intended for angling with wobblers, rotating and wobbling spoon baits.

All spinning rods have the same test. A medium rigidity, medium-fast action type spin fishing rod. This multipurpose fishing rod is suitable for angling with most lures: rotating and wobbling spoon baits and wobblers and various fish.

The guides with SIC inserts are classically arranged on the spinning rod blank; they are fastened on one leg. The rigid and powerful medium-fast action type spinning rod is made of IM7 graphite.

Its blank is equipped with lightweight guides with SIC inserts the biggest ring has two fastening points installed according to a new concept, which will off-load it under the most significant loads. The spinning rod is equipped with a convenient elongated cork handle with q classic reel seat. The spinning rod is intended for angling big fish on heavy lures. A multipurpose, medium rigidity spinning rod. Spinning rods have various action types — from fast to medium — depending on their length.

The spinning rod is equipped with guides with SIC inserts fastened on one leg, a handle made of natural cork and a reliable screw-type reel seat. This medium-fast action type spin fishing rod has been developed for angling with jig baits. A very sensitive tip is pasted in the spinning rod blank, which allows the high-quality control of guiding the bait to be ensured. It is equipped with guides with SIC inserts, a handle made of natural cork and a reliable screw-type reel seat.

The medium-fast action type spinning rod is specially developed for angling with jig baits. Its blank is made of IM7 graphite and the sensitive tip made of glass fibre is glued to its upper part. This allows the bait to be controlled and guided at any depth or strong crosswind. The spinning rod tip has contrast colouration. The blank has guides with SIC inserts installed, fastened on one leg and arranged according to classic scheme. The spinning rod is equipped with an elongated cork handle with a classic reel seat and a rubber buffer on the base end.

A special multiplier spin fishing rod for angling by jerk guiding with medium and large jerk baits. The multiplier reel is fastened with the upper threaded handle. A composite, multipurpose, medium-fast action type spinning rod for angling with various lures.

The spinning rod blank is equipped with lightweight guides with SIC inserts on high legs and an elegant cork handle and a lightweight buffer on the base end. The spin fishing rod for angling on jig baits.

The spinning rod blank of medium-fast action type is made of composite and a sensitive tip of graphite. The spinning rod is equipped with lightweight guides with SIC inserts, the elegant handle with cork covering and the reliable screw reel seat.

A composite, multipurpose medium action type spinning rod. The handle has a classic reel seat with a lower fastening type and a plastic tip on the base end. A composite, medium action type, compact telescopic fishing rod made, equipped with reliable guides with SIC inserts. The cork handle with a lower nut of fastening the reel has a technological plastic screwcap on the base end. The spinning rod blank is made of lightweight glass fibre; the sensitive hollow tip is glued on its upper part.

The guides are equipped with SIC inserts. The spinning rod blank has a neoprene handle with screw-type reel fastening. A series of inexpensive, medium-fast action type spin fishing rods made of glass fibre. The spinning rod has IN STEEK type fastening of pieces, a neoprene handle with classic reel fastening with a lower fastening nut and guides with SIC inserts installed on one fastening leg. A multipurpose, economy class telescopic spinning rod made of lightweight glass fibre.

The fishing rod is equipped with ceramic guides with the soldered fastening of each ring to the upper support ring. The handle is made of neoprene and equipped with a screw-type reel seat with a lower fastening nut. A medium rigidity, medium-fast action types spinning rod intended for angling big fish. The spinning rod withstands extreme loads; it will not break if a fish suddenly goes under the boat and bends the spinning rod more than the critical angle.

The blank is made of composition materials and equipped with lightweight guides with SIC inserts, a convenient cork handle with a reliable classic reel seat and a rubber buffer on the base end. The spinning rod is intended for angling predatory fish with lures of any kind.

A powerful, multipurpose spinning rod made of extra-strong composite materials and an grown-in sensitive tip made of glass fibre. The mediumfast action type blank is equipped with reinforced guides with SIC inserts, a cork handle with a reliable graphite reel seat with a lower nut reel fastening and a neoprene buffer on the base end. The spinning rod has a rigid blank and is intended for extreme angling of large predatory fish with any kind of lure, as well as for trolling fishing. Trolling Fishing Rods be clearly visible by the spinning rod tip while being guiding.

All fishing rods of this model series are designed for fighting the strongest fish. This group of spinning rods meet increased standards not only by power, but also by sensitivity. Working the bait at depths should. A powerful, medium-fast action type spin fishing rod for angling big fish from a boat, primarily for trolling.

The blank is made of composite, with a grown-in transparent glass-fibre plastic tip. This powerful trolling rod is intended for trolling big fish. The very durable fishing rod blank is made of composite materials and has a grown-in transparent glass-fibre plastic tip.

The sensitive tip clearly responds to bait being worked at depths. It is able to withstand loads that bend it to negative angles when playing a fish. The blank is equipped with reinforced guides with SIC inserts, a convenient neoprene handle with a reliable screw-type reel seat. A powerful trolling rod intended for trolling big fish. The blank is equipped with reinforced guides with SIC inserts, a convenient neoprene handle with a reliable multiplier type reel seat.

Extremely powerful rod for angling by using the baits up to g. The blank is made of special reinforced glass fibre and equipped with reinforced rings and SIC inserts, with two legs.

Powerful handle is made of neoprene. The rod top is painted in bright yellow signal colour. One- and two-piece powerful fishing rods for trolling and for angling by weighing from a boat or with bottom tackle. Medium action type fishing rods with IN STEEK connection, reinforced guides with SIC inserts, a neoprene handle with screw-type reel fastening with a lower nut and a rubber buffer on the base end.

A powerful glass-fibre plastic telescopic fishing rod for trolling and for angling by weighing from a boat. The fishing rod blank is equipped with reinforced double-support guides with SIC inserts and an additional offloading ring on the upper piece with a colour tip. These fishing rod models lets you choose the best fishing rod for specific conditions. Thanks to IM7 graphite reinforced due to a special fibre weave, the fishing rod is of medium-fast action type and has high power.

The fishing rod is equipped with the classic diverse handle with neoprene grips, a reliable reel seat with a lower nut reel fastening, increased Guides with SIC inserts and an additional off-loading ring on the small lash.

The lower grip is protected against damage with the screw-type titan buffer. The convenient synthetic case will protect Guides against damage when transporting the fishing rod. The fishing rod allows lures weighing up to g to be cast; the fishing rod holds lures up to g. A two-piece, medium action type carp fishing rod with a blank made of IM6 graphite that is sufficiently rigid and has a good casting ability.

The fishing rod has: reinforcing guides with SIC inserts, a diverse handle with neoprene grips, a reliable screw-type reel seat and a metal buffer on the base end.

The fishing rod allows lures weighing up to g to be cast. A three-piece, medium action type carp fishing rod with a blank made of IM7 graphite that is sufficiently rigid and has a good casting ability. The fishing rod has: reinforced guides and a tulip with SIC inserts, a diverse handle with neoprene grips and a reliable screw-type reel seat.

It is convenient to transportation because of its small external dimensions. These carp fishing rods allow lures weighing up to g to be cast. A sufficiently powerful, medium action type carp fishing rod made of composite material. The fishing rod has three pieces, making it compact when transported. The blank is equipped with reinforced guides on two supports with SIC inserts and a straddled cork handle with a lower nut reel fastening.

The well-casting fishing rod blank has a handle with a reliable reel seat. An inexpensive fishing rod for angling not only carp, but also other big fish. Every detachable tip has a distinctive colouration on the upper part, depending on rigidity: yellow, green or red. Fast action three-piece feeder fishing rod with casting weight up to g. Blank is made of IM7 high-modulus graphite ensuring the necessary hardness and good casting ability.

The feeder is equipped by rod guides with SIC inserts, cork handle with classic screw-type reel seat. Three various sensitivity feeder tips are packed in plastic case for better transportation and storing. The blank is made of high modulus IM7 graphite. The feeder rod is equipped with Guides with SIC inserts, a neoprene handle with a classic reel seat with a lower fastening nut. A neoprene handle with a rubber buffer on the base end. A complete set in the case includes three tips with different rigidity.

Reliable, well-casting, threepiece medium-fast action type fishing rods are equipped with two detachable sensitive tips of different rigidity. A reliable, three-piece medium action type fishing rod with two detachable tips that indicate different rigidity. The blank made of lightweight glass fibre has an IN STEEK connection, is equipped with guides with ceramic inserts, a convenient neoprene handle and a reliable screw-type reel seat.

It is recommended for a wide range of anglers. This medium-fast action picker rod is made of lightweight glass fibre. Lightweight, well-balanced, well-casting fishing rods allow active angling with a quick changing of angling places, from any bank or from a boat. They are equipped with three detachable tips, which indicate different rigidity.

All match fishing rods are made in accordance with special requirements for the tackle of this type. They meet all the necessary conditions: are executed on a lightweight blank from 3. Modern design and angling fashion have certainly been taken into account by designers and manufacturers when creating this series.

The blank is made of IM7 graphite with the reinforced laying of carbon fibre, which ensures rigidity, maximum casting ability and precision of casting.

It is equipped with high original Guides with SIC inserts and a combined handle with a buffer on the base end. The handle has a graphite reel seat installed. It is completed with a rigid tube.

Classic three-piece rod designed for match angling. Combined corkand-neoprene handle has screw-type reel seat with lower fastening nut and rubber buffer at the end. The combined cork and neoprene handle has a screw-type reel seat with a lower fastening nut and a rubber buffer on the base end. A series of inexpensive, medium action type match fishing rods. The composite, which mainly consists of IM6 graphite, has allowed a sufficiently lightweight and durable blank to be manufactured.

It ensures good balance, good casting ability and precision when casting. A large number of high guides with SIC inserts allows favourable working with tackle up to 25 g — in rainy weather, too. Fly Fishing Rods The popularity of fly fishing is quickly growing among anglers. SALMO fly fishing rods for angling on artificial flies are represented. Thanks to the blank action type and accessories, these fishing rods are a generally excellent and inexpensive fishing tool. These medium-fast action type fly fishing rods are made of IM7 graphite with a special carbon fibre weave.

The action type of the fishing rod allows beginning anglers to master the basics of fly fishing in the easiest way; it ensures the smooth and aimed casting of the fly. All fishing rods of this series are equipped with a cork handle with a classic metal reel seat. The tulip and guides of the upper piece are made of high-quality stainless steel wire and have one fastening point; the two biggest guides of the lower piece have SIC inserts, which facilitates an increased casting distance and the durability of the line.

Each of three fishing rod models is made for a specific line class. These powerful fishing rods of sufficient length are intended for power casting heavy lures great distances from the shoreline.

The design of these special fishing rods allows adequate coping with this task even with strong surf wind. The powerful three-piece fishing rod is made of lightweight glass fibre and intended for power casting heavy lures into the wind. The fishing rod is equipped with reinforced guides with SIC inserts; in doing so, the biggest ring is compactly folded when transporting. The powerful telescopic fishing rod for angling in the sea is made of composite.

The telescopic design of the fishing rod ensures an ease of transportation. The blank has reinforced guides with SIC inserts installed on high legs. The guides are protected with a special durable cover made of a foam material encased in nylon. These are ready to use tackles selected for the main kinds. Those who purchase a ready set need only to go to a body of water and hook bait or to tie on their spoon bait of choice.

The set of angling rod consists of a telescopic fishing rod and ready to use float tackle. Please do not forget to hook bait — it is not a part of the set. This angling rod set consists of a powerful telescopic fishing rod and a TAIFUN reel, fold-out landing net and a stand under the fishing rod, packed in a plastic bag.

The fishing rod is intended for angling big fish: pike with live-bait and carp or big trout in pond farms. A monofilament fishing line is wound on the reel spool.

The set is packed in a convenient plastic bag with a zip fastener. The compact set is suitable for angling grass pike, bass and other predatory fish of medium size. The multipurpose set is suitable for angling pike, bass and other predatory fish. The fishing rod is intended for angling big fish: carp, pike with live-bait and big trout in pond farms.

It is made at a specialised factory in Japan. A soft, transparent fishing line with low a stretch coefficient that ensures its high sensitivity and necessary elasticity. It is unreeled on spools of 30 m and m. The fishing line is for all-season use and is very resistant to UV radiation. The soft fishing line has faded aqua colour. It retains its positive properties all year round. Special processing has increased its resistance to UV radiation and long periods in water.

It is unreeled on spools of m. The fishing line is light-green for a camouflage effect. The colourless fishing line is absolutely invisible in water. Made in. It is of a light grey colour. The soft fishing line has a light green colour that camouflages it as algae. Diameter, mm 0. High durability and softness are distinctive features of this fishing line series. The fishing line is dark green and in spools by m.

High strength, a low stretch coefficient and softness are distinctive features of this fishing line series. The fishing line is resistant to UV radiation.

Wide range of lenghts on the spools: 20, 91, , , and m. Made in Japan. Braided line is recommended to use in cases when needed line strength for normal monofilament lines is not enough.

Their bodies are produced only from balsa. The high execution level of all float components and the entire product: high-quality surface Floats are supplied in piece blister packages.

High-quality exterior finish ensures the long life of the floats. Floats are supplied in piece polybag packages. Black silicone stopper. A set contains 10 pieces. Silicone Stopper Silicone stoppers of various colours. Every stopper size is intended for a certain fishing rod diameter. To put the stopper on a fishing line, the fishing line should be inserted in the wire eyelet and the stopper should be moved on it.

A set contains 30 pieces. It is not customary to be thrifty regarding such small things. In order to avoid losing. All of them are represented in this section. The set contains leaders in three sizes, with 10 pieces in each size. Each size has its own breaking load. High-quality leaders made of an extra-strong modern material — titanium wire.

The non-corrodible leaders have a dark black oxide outer coating. They are recommended for spin fishing and trolling fishing. All leaders are equipped with swivels and snaps made in Japan. They consist of 49 inter-braided steel micro wires.

These leaders are very soft and elastic — they are no more rigid than monofilament fishing line of the same diameter. The leaders are equipped with high-quality Japanese swivels and snaps that are fastened with crimping tubes.

The selection of fasteners has been performed in accordance with the breaking load on the leader material. Depending on the current, the distance of casting and other factors, it is easy to select the necessary feeder from the range below.

It is equipped with an additional plummet. It is intended for fishing in stagnant water and water bodies with a slow current. Package contains 6 pieces. A twisted steel feeder. It is equipped with an additional ring for tying on the leader. It is intended for fishing in stagnant water. A half-round steel feeder. It is intended for fishing in stagnant water and water bodies with current.

A round steel net-shaped feeder. The net-shaped material of the feeder allows the bait to be better washed away with water. It is equipped with an basket holder and an additional ring for tying on the leader. These are straight and net basket holders with latch hooks fastened onto them. A feeder or plummet can be fastened to the latch hook.

DEFAULT
DEFAULT

windows 10 99 cpu usage fix free

- Salmo Katalog Lato by Marek Kwiecień - Issuu

diamond feeder 90 Трисекционна фидер въдица с бърза акция до 90г. Изработена е от високомодулен графит (IM7), който осигурява необходимата здравина, но същевременно и лекота и еластичност. SALMO Diamond feeder 90 3,6m 90g SALMO Diamond feeder 90 3,6m 90g. SALMO Diamond feeder 90 3,6m 90g. Výrobce: Salmo. Rychlá akce třídílného feeder prutu s IM7 high-modulem grafitu, zajišťuje potřebnou tvrdost a Celý . Salmo Diamond BP FEEDER 3. 90 ( -2) MAKšĶERĒšANAI > CITI ZIEMAS AKSESUĀRI. replace.me Piegāde no: €. €. Колено 1-е удил. Salmo Diamond BP FEEDER 3. 90 ( -1) MAKšĶERĒšANAI > CITI ZIEMAS AKSESUĀRI. replace.me

Download media player for pc windows 10

Intel hd 3000 driver windows 10 download

Windows 10 ltsb 32 bit free

Lisp windows 10

DEFAULT

DEFAULT

- Salmo diamond feeder 90 3.60 free

Подсобка компьютера надежно закрыта. Ни он, ни Сьюзан не услышали тихих шагов в направлении Третьего узла. ГЛАВА 60 По зеркальному коридору Двухцветный отправился с наружной террасы в танцевальный зал. Остановившись, чтобы посмотреть на свое отражение в зеркале, он почувствовал, что за спиной у него возникла какая-то фигура. Он diamobd, но было уже поздно.

adobe premiere pro cc how to install free

DEFAULT
DEFAULT





DEFAULT
DEFAULT

4 comment